Facebook | Double Glazing Jobs | Guest Contributions | Contact | Terms

Renegade Conservatory Guy

Join RenegadeClub and get FREE email updates from me...

Posts Tagged ‘c rated windows’

How do I comply with the new regulations from 1 October?

Tuesday, August 24th, 2010

Following is a letter from Giles Willson sent to Nathan at the Glazine which I thought might be useful guidance (and another very easy post for me where I can copy and paste):

How do I comply with the new regulations from 1 October?

This is the question which we are still being asked; we have known and published the details of the new requirements since they were published at the end of April – ie replacement windows need to be WER B and C rated or better or whole window U-value 1.6. The centre pane U-value is not accepted as a method to show compliance for the majority of replacement windows.

The BFRC WER approach has been in existence for over 10 years, with the Authorised Retailer scheme and Licence of Addition; the route for covering your products is now very comprehensive. More details are available from www.bfrc.org

If you want to use the whole window U-value approach; the difficulty with this change in regulation compared with the existing 2.0 U-value is the window needs to be validated to achieve the 1.6 U-value. Currently to achieve a 2.0 if you use low emissivity glass, 16mm air gap you are deemed to be compliant. The magic specification to achieve a 1.6 U-value keeps on being requested.

The work which has been undertaken by BFRC with the detailed simulation of thousands of window combinations and the resulting whole window U-value and WER means we can look at which combinations achieve the 1.6 U-value. One solution is that if you have a timber or PVC-U frame (as long as it has five chambers) and you use an IGU comprising: soft coat low-e glass, 90% gas filled and warm edge spacer bar; you will achieve a 1.6 U-value.

We know there are many other combinations of component which can achieve the 1.6 U-value and this does not preclude the use of hard coat low-e glass or standard spacer bar, however, the above specification is a clear simple guide for FENSA registered window installers who need a quick guide solution to be prepared for 1 October 2010.

We would also like to remind readers that there are transitional arrangements applicable for the replacement window industry for the change to the 2010 regulations under Approved Document L1B. Any contract signed before 1 October 2010 can be installed using 2006 guidance as long as the installation starts before 6 April 2011; all contracts signed after 1 October must comply with the 2010 regulations.

FENSA inspections will be reflecting the transitional arrangements therefore, it is assumed that all installations registered during October and November will have contracts signed before 1 October therefore will be compliant via the 2006 regulations. From December FENSA will be checking against the 2010 regulations (if the contract was signed before 1 October 2010 and is inspected; any non compliance due to meeting the old thermal performance requirements, can be cleared by producing a copy of the signed and dated contract and still comply with the 2006 requirements).

Yours

Giles Willson
BFRC / FENSA

gwillson@ggf.org.uk
020 7645 3700
enquiries@fensa.org.uk

The wait is over: Approved Docs L and F are published

Friday, April 30th, 2010

I do apologise to everyone who got the impression from a previous post that I might be retiring from RCG.  It appears I’ve not done a very good job of it.

Anyway, here’s a press release that might be of interest:

The Glass and Glazing Federation (GGF) is extremely pleased to note from the final Approved Document L (Conservation of Fuel and Power) and Approved Document F (Ventilation) for England and Wales, announced on  30 April 2010, that the Communities and Local Government (CLG) have listened to the representations  of the Federation and the industry.

Giles-Willson,-Technical-Di

The principal changes announced were as follows:

  • For replacement windows, compliance to be based on Window Energy Rating Band C (currently Band E) with an alternative of a U Value of not worse than 1.6 W/m2K (currently 2.0). The centre pane alternative of 1.2 remains but for a limited range of applications only.
  • Conservatories: The current exemption clause remains
  • The potentially burdensome requirement of ‘Consequential Improvements’ has been excluded.
  • A proposal for trickle vents to be fitted to all replacement windows has been dropped (under strong pressure from the GGF).
  • For WERs it is pleasing to note that the calculations, bandings and a common basis for sensible control measures are listed within Advanced Document L ensuring consistency between potential future operators and thereby providing a level playing field for the industry and clarity for the consumer.

These will be become mandatory from 1 October 2010.

The GGF is also pleased to note that the corresponding requirements for replacement windows in Scotland will be similarly based (though not identical) which will ease the cross-border disparity that has existed since 2002.  This will be particularly welcomed by those members operating in both Scotland and England.

GGF will be providing a fuller analysis for its members in due course and is collaborating with seminars planned for FENSA registered businesses over May and June to provide detailed guidance on compliance and changes required to the registration and inspection process.

The GGF and its Technical Director Giles Willson have been heavily involved throughout the consultation process, initially through the Fenestration Industry Thermal Performance Working Group, and continuing via close contact with CLG up to finalisation of the Documents. They have thereby ensured that the industry’s needs have been conveyed to the CLG and well reflected in a balanced final document supportive to the needs of the industry. Their input has been influential on behalf of its members and the wider industry, as it was with the consultations for the 2002 and 2006 editions of the regulations.

Stepping back in time with English Heritage

Tuesday, November 17th, 2009

Guest post from Martin Randall – Crystal Direct

As we have come to expect from English Heritage, the article ‘Meet the building regs: Yes we can’ (Bullseye, issue 12) smuggled in a lot of prejudice and opinion as fact. It was like stepping back in time.

I’ll leave the BFRC, systems companies and dedicated sliding sash companies like Masterframe to put English Heritage right on its technical inaccuracies. But the idea that heavy curtains and ugly, space-hogging secondary glazing will improve energy saving enough to match double glazing and achieve a C-rating seems highly improbable. If you have to keep the original windows then yes, you’ll have to use every trick in the book including secondary glazing, roller blinds, heavy curtains and extra seals to paper over the cracks and gaps and cut down on draughts.

And on a good day, maybe you can reduce the whistling of the wind and cut down on heat leakage. But it isn’t much fun living in artificial light behind a barricade of secondary glazing, roller blinds and heavy curtains. It says that a combination of these methods will upgrade most sash windows to meet building regulations. Would that be the equivalent of an A, B or C window energy rating, or is it a G?

I fully support the idea of protecting our heritage and I think wood is great for floors and stairs and furniture. But in British weather it’s not an ideal material for window frames.

Georgian sashes lasted a long time because the timber was seasoned, and they were well made. But, Georgian houses also set the windows back in a rebate so they were protected from the weather. And labour was cheap and plentiful, so they could afford to repaint and repair at frequent intervals.

If not well maintained and protected against the weather, timber rots and degrades quickly, particularly in coastal regions. That’s a fact. The RCG Blog has an excellent set of photographs to remind us, showing what happens to windows that haven’t been maintained. I recommend everyone to visit the site and see what weather does to wood. The same RCG photographs are on the Fighting Back with Facts website.

Many home owners have not experienced life with timber windows. In most very new houses with double glazed timber windows the frames are now built to a higher spec and they will last – provided you maintain them. But anyone who lived in a house with timber windows built between 1980 and 2000 knows that timber doesn’t last. Many failed catastrophically in five to seven years. Yes, you do get badly installed PVC-U windows, and ones with cheap hardware and poor designs to meet a price, but in general PVC-U windows look good and last many years.

Georgian builders used the most modern materials and products that were available at the time. Had modern PVC-U windows been available they would have used them.

Mr Nicholas comments that unlike PVC-U, timber windows ‘can be repaired easily and be made to look brand new again with just a simple coat of paint’. Given their vulnerability to the weather, they have to, although I think he is forgetting the filler, the primer and undercoat and the second coat of gloss if you want them to last. Maintaining timber windows beyond the first few years is a labour of love.

Mr Nicholas refers to energy saving measures as a ‘fad’. I disagree. Surely it pays to avoid waste, in energy as in other things? Saving the energy lost through windows has a far greater impact than switching to energy saving light bulbs and other token gestures. And the idea of renewable energy is not to get us off the hook so we can squander it.

English Heritage does much good, but heavy curtains are not the answer. If they were, would the rest of the world have invested so much money and effort in seeking ways to save expensive energy?

Yours sincerely
Martin Randall
Chairman, Crystal Direct and Founder of Fighting Back With Facts

  • Sponsors

  • image widget
  • image widget
  • image widget
  • image widget
  • image widget
  • image widget
© 2010 Renegade Conservatory Guy